Embedded Systems Interview Questions And Answers

It is usually operated by counter devices. With embedded system, it is possible to replace dozens or even more of hardware logic gates, input buffers, timing circuits, output drivers, etc.

The memory bus is used to carry the address and the data from the processor to the memory so that it can be easily accessed by the devices. When it comes to a huge value system stalls its execution due to unavailability of the memory. The memory allocated by memory is not automatically cleaned up by the compiler after execution of the functions and should be cleaned up by the programmer using the free function. But unnecessary memory wastage.

Follow our embedded systems job interview questions and answers site to get through your job interview in first attempt. Timers in embedded system are used in multiple ways. How does a combination of functions reduce memory requirements in embedded systems? How does combination of functions reduce memory requirements in embedded systems? Solaris Interview Questions.

What are the different types of system involved in embedded system? By declaring a variable volatile, we can tell the compiler that the value of the variable may change any moment from outside of the scope of the program.

Embedded Systems interview questions

Waiting for an opportunity to change your career? Volatile keyword is used to show that the value can be changed anytime in the program. The size of the char and int are always dependent on the underlying operating system or firmware. Mutex is also a tool that is used to provide deadlock-free mutual exclusion either consumer or producer can have the key and proceed with their work.

36 Embedded Systems Interview Questions and Answer

Why do we need virtual device drivers when we have physical device drivers? In those cases it is required not to optimize the code, doing so may lead to erroneous result and load the variable every time it is used in the program. This problem tests whether you know that it is legal to typecast an integer to a pointer in order to access an absolute location. These different devices may have very different speeds of communication.

36 Embedded Systems Interview Questions and Answer

In some computer languages e. But, if there any problem comes in any program or the process than the entire system comes to a halt and slows down the whole system.

Embedded Systems Interview Questions

Input and output buses move at the slower rate or speed than the processor speed. When there is no poll available to spawn it makes the system to sleep for an amount of time till the request for another poll reaches.

Embedded C Interview Questions and Answers. Advanced embedded systems interview questions and answers Advanced embedded systems interview questions and answers - What is read modify write technique? In the processor architecture, adobe flash player 10.3 windows xp memory addresses are specified in two parts called the segment and the offset. This is a technique that is use to deal with the short processes that involve input and output. Multiplex data bus consists of the bus that can read and write in the memory but it decreases the performance due to the time consumed in reading and writing of the data in the memory.

The soft real time systems on the other are not very rigid as the hard real time systems. This statement holds true in the scope of the program.

In such a case the value of the variable can be changed outside of a program. We can pass any kind of pointer and reference it as a void pointer. Even though both serve the same purpose, its always better to know why you are using the first or second. Read This Tips for writing resume in slowdown What do employers look for in a resume? Whereas, Computational model can, deal with constraints easily and it provides an upgradeable solution.

Its value is not changed by any part of the code executed. There is another way of doing it, i. The performance of the system degrades with the lateness of response, but it is bearable and can be optimized to a certain level for reuse of the result. Write code to accomplish this task. Malloc is the function that is used for dynamically allocating memory to the different variables.

These are procedures stored at specific memory addresses which are called when certain type of interrupt occurs. The best way is to write count down loops and compiler can generate better machine code for it than the count up loops. Interrupt latency refers to the time taken for the system to start the handler for the specific interrupt.

Embedded Systems Interview Questions

36 Embedded Systems Interview Questions and Answer

Semaphore is a synchronization tool to overcome the critical section problem. These buses carry the value of the data that has to be passed for the proper functioning. The way to take out the common features and have them as separate object entities only to be reused by the other objects in a modular fashion. The recursive functions refer to the functions which make calls to itself before giving out the final result. Generally microcontrollers have power saving system, like idle mode or power saving mode so overall it uses less power and also since external components are low overall consumption of power is less.

There is a possibility to send more transistors for a layout to be given. Have you ever lie on your resume? If the loop iterates only a few times, it can be fully unrolled, so that the loop overhead completely disappears. This creates the problem of having the deadlock due to slow processing of it.

Embedded Systems interview questions

Embedded Systems interview questions

And pointers are always passed by reference. These basically create an illusion for the users as if they are using the actual hardware and enable them to carry out their simulation results.

Multi-threading allows a simple thread to be stored and polled. The inline functions can have the data types too defined as a part of them. The processor in this case calls a special function to handle the request that comes and leave all the work that is getting performed at that time. What is the need for having multibyte data input and output buffers in case of device ports?

Embedded Systems Interview Questions

Can you tell me what are the basics for it? The English is riddled with mistakes. The microcontroller is a self-contained system with peripherals, memory and a processor that can be used as embedded system. Hybrid Real-Time Systems - These systems includes the properties from both the systems and increases the performance.

Which is better a char, short or int type for optimization? Wisdom jobs got the right offer for to build an excellent career.